Support bracket and post mount for horizontally mounted single axis translators
The support stand carries the weight of a horizontally mounted linear translator and its drive on a post, taking load off the chamber port. A bracket mounts to the outboard end of the translator and bolts to a standard 1.5″ (38 mm) aluminum extrusion post. For a long or heavy payload on the extended tube, add the Roller Support for Horizontal Translators.
Shown on a BLT45S translator driving a Beam Flux Monitor, and available for any horizontally mounted single axis translator model.
- Supports the translator and drive from a post
- Translator mounting hardware included
- Clearance holes at 5″ (125 mm) spacing for a standard 1.5″ (38 mm) aluminum extrusion post
- 1/8″ (3 mm) thick 304 stainless steel
Options
Material: Anodized aluminum in place of 304 stainless steel.
Post: Standard 1.5″ (38 mm) aluminum extrusion post.
Post mounting hardware: 5/16″ bolts and tee nuts.