Long-stroke horizontal translation for long, heavy devices

The HLT translator moves a long, cantilevered device such as a differentially pumped plasma probe or mass spectrometer over a long stroke. It supports both ends of the device against gravity and atmospheric load over the full travel.

The standard unit has 4.5″ (CF63) flanges, guide rails, a hand crank, and 30″ (760 mm) of travel. Stroke, flange size, clear ID, and mounting are all built to order.

• Strokes from 4″ to more than 60″ (100–1500 mm)
• Traveling flange and carrier take a 4.5″ (CF63) ConFlat; larger flanges available
• Chamber-side flange specified at order
• Linear bearings adjustable in place to remove play
• Adjustable support legs, 31–47″ (800–1200 mm), with floor-mount bracket; custom heights available
• Bakeable to 150°C

Model Breakdown

HLT4530: 4.5″ (CF63) flanges, 30″ (760 mm) travel, manual drive.

Model above is the standard starting point. Contact factory for other strokes and flange sizes.

Options

Motorization: The hand crank can be replaced with a DC motor, servo, or stepper motor.

Roll-around base: Base with wheels, jack screws, and an instrumentation shelf.

Isolation: Optional gate valve to isolate the mounted device from the process chamber.

Custom configurations: Other strokes, flange sizes, clear IDs, leg heights, and mounts.

CONTACT FACTORY FOR CUSTOMIZATIONS AND ADDITIONAL OPTIONS

Tech Specs

• Flanges: 4.5″ (CF63) standard; larger available
• Travel: 30″ (760 mm) standard; 4″ to more than 60″ (100–1500 mm) to order
• Drive: hand crank standard; DC, servo, or stepper motor optional
• Leg height: 31–47″ (800–1200 mm) adjustable; custom heights available
• Bakeout: 150°C