Precision XY Manipulator Platforms

 

MC2000-2.4 with custom 8" CF
Click on the photo for a larger view.
         The MC1500 and MC2000 series of XY translators combine extremely high rigidity, a large working bore and affordable cost. They are available in both ± 1.0 (± 25 mm) and ± 0.5" (± 12.5 mm) travel, circular pattern, with both manual and stepper motorized versions. In fact, conversion from micrometers to stepper motors can be done in 15 minutes at the user's site. Both the MC1500 and the MC2000 have features not found on translators available elsewhere, such as tilt adjustment on the top flange, standard.

 
One distinct advantage of the MC1500 or MC2000 is the cost savings when long Z Axis strokes are required. Since only the bellows in the XY portion needs to be larger than the probe (see Z Axis) , the user can extend the Z Axis stroke using a smaller diameter (less costly) bellows that just clears the probe running through it. Simply select the model below that best suits your needs.
         For horizontal mounting, i.e., with the flange faces vertical, dual constant force counterbalance springs are available that compensate for gravitational loads. If required, this feature can be added in the field, after the user accurately determines the weight of the devices to be mounted.

Click on the photo
for a larger view.

         To make your selection, add the total travel required in either the X or Y axis to the maximum diameter of the device that will pass through the MC1500 or MC2000. This sum determines the minimum bellows inside diameter (ID).

        Next, select the bottom flange that best mates to your chamber or other equipment. While the most common size is 6" OD, either tapped or non-tapped flange sizes of 4½" (114 mm), 6" (150 mm), 8" (200 mm) and larger are available.

         Now you are ready to select a Z axis translator that best mates to the device to be manipulated, to complete your XYZ sample manipulation needs.


Click on the graphic
for a larger view.


MC1500-1.4 Dimensions
MC2000-2.4 Dimensions

MC1500 / MC2000 Price List
Model XY Travel
Flange Size
 Clear OAL Height / Flange Holes* Price
Number
Circular pattern
OD
 I.D. Both Clear One tapped Both tapped (US Dollars)
MC1500-1.3 
± 0.5 (12.5)
4.5" (114)
2.87" (73)
 5.62" (143)
 5.12 (130)
 4.62" (117)
$4,075
MC2000-1.3 
± 0.5 (12.5)
6" (150)
2.87" (73)
 4.75" (117)
 4.75 (117)
4.75" (117)
$5,650
MC2000-1.4 
± 0.5 (12.5)
6" (150)
4.0" (100)
 6.0" (150)
 5.5" (138)
 5.0" (127)
$6,500
MC1500-2.3 
± 1.0 (25)
4.5" (114)
2.87" (73)
 6.62" (168)
 6.12" (155)
 5.62" (143)
$5,650
MC2000-2.3 
± 1.0 (25)
6" (150)
2.87" (73)
 5.75" (146)
 5.75" (146)
 5.75" (146)
$6,775
MC2000-2.4 
± 1.0 (25)
6" (150)
4.0" (100)
 7.12" (180)
 6.62" (168)
 6.12" (158)
$7,575
Dimensions are in inches (mm) - Standard with non-tapped flanges both ends
*Add $55 for each tapped flange
For ±1" (±25 mm) models, add $800 per pair for large micrometers
For ±0.5" (±12.5 mm) models, add $500 per pair for largemicrometers
Stepper motors , add $495 per axis   -   Horizontal Mounting Kit, add $415
Stepper Motor Controller (first axis), add $1500
Additional Axes (may be combined - consult factory), add $750
Consult factory for options not shown

Special Mounting Instructions:
        On specially ordered models of McAllister Technical Services' MC2000 XY translator, the lower flange can have through (i.e., not tapped) bolt holes. This allows the translator to be mounted on mating conflat flanges that have tapped holes, like gate valves, for instance. This significantly enlarges the user's mounting options. This feature is unique to McAllister Technical Services' MC2000. These instructions give detailed information for mounting the MC2000 translator to a tapped mating flange. 
McAllister Technical Services
Contact Us
About MTS
Home
Warranty
Terms
BLT Page
Large XYZ
Manipulators
XY Platforms
Small XYZ
Manipulators
Various Gizmos
Copyright © 2001-2008 McAllister Technical Services. All rights reserved.
Last Updated:April 2009