BLT27S Specifications and Instructions

Model BLT27S Translator

        The newest member of the 2¾ CF translator family, the BLT27S has the cantilever brackets (see drawing) bolted to the side of the flange. The advantage here is that the cantilever brackets leave 75% of the circumference of the flange unobstructed. This allows the translator to mount in very close quarters without interfering with other, nearby flanges.
         The bottom (or fixed) flange of the BLT27S is available with an optional 12-hole pattern for further flexibility. Since the actuator cannot be repositioned relative to the bolt holes, the 12-hole feature allows the user more options in mounting orientation. Despite its modest price, the BLT27S will provide years of trouble-free service, especially if the simple maintenance is performed. 

         All MTS BLT lead screws use ball bearings. The lead screws are dry lubricated with baked-on molybdenum disulfide and the bearings are lubricated with molybdenum disulfide grease for low friction and long life. All parts are field replaceable, including the bellows. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges and special heights.

BLT27S Photo      
Maintenance Instructions:

 The BLT27S needs only minimal maintenance. The linear bearings are self-lubricating and the guiderods and jacking screw need only be kept clean and free from dirt, dust and debris. The jacking screw and bearings do, however, need periodic lubrication.

         As delivered, the screws are coated with baked-on molybdenum disulfide. This coating will degrade over time, due to moisture in the atmosphere. After each bake out, lightly relubricate the screws with the (provided) silicone-based molybdenum disulfide grease. Be especially careful not to use a hydrocarbon grease such as Felpro C100TM unless you periodically clean the oxidized residue from all load-bearing surfaces. The normal bakeout temperature is 150oC but higher temperatures can be used, if needed. For bakeouts between 150oC and 210oC, increase the frequency and thoroughness of lubrication.


  
To thoroughly re-lubricate the bearings while the translator is under vacuum, 
  • First move the translator to its fully extended position.
    •  Place a spacer between the traveler and lower bracket. (Wood or metal work well.)
  • Remove the bearing retainer flange on the lower bracket.
    •
  • Turn the knob counterclockwise to extract the bearings from the lower bracket.
    •
  • Work the factory-supplied grease into the bearing. Remember: a little goes a long way!
    •
  • Replace the bearing, retainer and screws.
    •  Remove the spacer.
  • Do science.
    •
BLT27S Drawing

Model BLT27S Translator Price List
Model
Stroke
Clear I.D.
Compressed
 Price*
BLT27S-2**
2" (50)
1.53" (38)
2.6" (66)
$1,580
BLT27S-3**
3" (75)
1.53" (38)
2.75" (70)
$1,655
BLT27S-4**
4" (100)
1.53" (38)
2.9 " (74)
$1,776
BLT27S-6**
6" (150)
1.53" (38)
3.2" (81)
$2,175
BLT27S-8**
8" (200)
1.53" (38)
3.5" (89)
$2,775
BLT27S-10**
10" (250)
1.53" (38)
3.8 " (97)
$3,375
BLT27S-12**
12" (300)
1.53" (38)
4.1" (104)
$3,975
BLT27S-16**
16" (400)
1.53" (38)
4.7 " (119)
$5,175
BLT27S-20**
20" (500)
1.53" (38)
5.3 " (135)
$6,375
BLT27S-24**
24" (600)
1.53" (38)
5.9" (150)
$7,575
Dimensions are in inches (mm)    - and -     *Prices are in U.S. Dollars
**Includes rigid "backbone" and scale (see photo, right)
12-Hole pattern in foot flange, add $55
Tapped flange (1/4-28 or M6), add $15
DC Motor,limit switches, controller& pendant switch, add $1200
Stepper motor & limit switches, add $625
 Stepper motor controller, first axis, add $1500*
Additional axes (may be combined - consult factory), add $750

Model BLT27S-12

        In addition to our broad line of standard scientific products, we at McAllister Technical Services know that today's scientist needs choices and options to meet the ever-changing demands of the research environment. We are committed to providing those options. Please do not hesitate to contact us if you have any questions, comments or suggestions.

McAllister Technical Services
Contact Us
About MTS
Home
Warranty
Terms
BLT Page
Large XYZ
Manipulators
XY Platforms
Small XYZ
Manipulators
Various Gizmos
Copyright © 2001-2010 McAllister Technical Services. All rights reserved.
Last Updated: August, 2010